Welcome To PG Racing - Hoermann Truck
Posted by PG Racing
www.pgracing.co.uk
The Truck was developed particularly for 1:6 it on-Road-Racing. Contrary to the Off-road models the Truck possesses a lying down engine. For sufficient power a 23ccm Zenoah engine with a RN-Tuning air cleaner provides. The high-grade steel double tube muffler (optional Tuning) makes the Truck a model particularly worth seeing.
By the
adjustment possibilities of the front and rear axle completely
manufactured from aluminium the vehicle is optimally tuneable on
drivers, racing course and weather conditions. The aluminium
knuckles with brake admission permit the assembly of mechanical
or hydraulic brakes.
The drive unit with fixed connection between couplings,
intermediate shaft and engine mounting plate provide for one
sufficient stability, also without loss to the rear axle further
to give. The very durable hardened steel gear wheels provides
for the correct propulsion.
The Truck is equipped with a servo plate for 4 servo. The
more-over one are blocked with a mechanical transmission brake,
ball drive with dust seals, an aluminium / plastic Servo saver,
very low-friction ball bearings, a stable differential and the
special Truckräder.
The lateral and rear plastic body owners and the foam material
Front bumper permit the usual bodies for the wheel base 530mm
with the length 880mm, width 435mm.
The materials in detail:
Aluminium parts:
Chassis
Axle casings
Wishbone
Engine quick-change unit
Knuckle
Shock absorber tower
Shock absorber
Stop bolt
Servo save down part
Connecting piece for A + B axle casing
Thrust washer for plastic gear wheel
Engine flange
Transmission flange
Engine brake actuating disk
Differential housing
Side parts Differential Uprights
Rear shock tower
Steel Parts:
Chassis side parts
Wishbone pins
Steel ball for steering linkage
Tie rods
Hardened gear wheels
Clutch bell
High-grade steel elbow union
High-grade steel muffler
Drive shafts
Ball drive
Knockout spindle for ball drive
Plastic Parts:
Foam material Front Bumper
Body
Servo saver lower part
Plastic joints for the steering element
Fuel tank
Wheels
Boots for ball drives
Receiver box
Radio retaining plate
Carbon fibre servo plate
Optional Tuning:
Hydraulic brakes front rear axle
Carbon fibre brake disks
Spoiler attachment for rubber spoiler
Steel wheel driver 9,5mm with pins
Tie rod safety device
Personnel transponder mount
Check valve for tank ventilation
Adjustable spoiler
Tuning muffler